Wansview B Series Manual de usuario descargar pdf (Pagina 15)

H Series IP Camera User Manual - Waterproof

takes more bandwidth.

2） Bit Rate Adjustment: User can choose a certain bit rate, generally speaking, the bigger

the bit rate is, the more clear the image will be. Please choose the suitable bit rate

according to your bandwidth. If you select a big bit rate, while the bandwidth is worse, it

will cause the video stream can’t be transferred

smoothly, the video quality will be not

perfect too.

3） Max Frame Rate Adjustment: User can choose a certain frame rate, when the

bandwidth is limited, suggest reducing the value. Generally, the video is fluency if the

value is more 15 frames.

4） Bit Rate Control: There are two modes for bit rate control, CBR and VBR. If user

choose CBR mode, the video encoder will encode according to the bit rate you have

selected. If user choose VBR mode, the video encoder will consider to the image quality

and encode according to the bit rated have been selected, but not strictly according to

this bit rate.

5）

Mobile Resolution: If using mobile visiting the IP camera, you should set the resolution

of the image send to your mobile. For the bandwidth of the mobile is worse, we suggest

you to select the lower resolution. Please refer to the Part 8 on how to visit the IP camera

using mobile.

6）

Audio input mode: If user use microphone, please select “MIC”; if use line-in audio

signal, please select “Line in”.

7）

OSD Setting: User can add the equipment’s name and the time on the video page

thorough this setting.

7.2 Network Setting Page

7.2.1 Basic Network Setting

Figure 16

1） LAN Setting: The default setting of this equipment is showed as above Figure 16, user

can change it according to your network environment.

2） HTTP Port: The IP address Identity one IP camera in the network, you can run several

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Sin comentarios

Wansview B Series Manual de usuario Pagina 15