Wansview B Series Manual de usuario descargar pdf (Pagina 16)

H Series IP Camera User Manual - Waterproof

programs on this equipment, and every program will transfer the data through some port,

in fact data is transferred from one port to another. The port setting of this page is asking

user choose which port to transfer the data for the web server.

3） WIFI Setting: The wireless setting page is showed as below Figure 17, user can click the

“Search” button, it will show you the page telling you the WIFI network it has detected.

Please choose one of it, and the network data will filled in the blanks automatically. (For

example, SSID, encryption algorithm etc). User only needs to fill in the password and

retype the password. After you configured it, you can click the “Check” button to check if

there is any mistake.

Make sure the IP camera you are using is /W model before configuring the WIFI

setting.

Figure 17

If the equipment has been linked to the Ethernet cable, and the WIFI function was

started. The equipment will choose the wire connection with the network first. If the

connect does not work, it will choose WIFI connection. No matter choose Ethernet

cable to connect or WIFI to connect, the IP address and port number of it are the

same.

7.2.2 Remote Access Setting

1） WAN IP Test: Click the “Show” button as above Figure 18, it will show you another new

page displaying the WAN IP address when it is connected to the Internet.

2） Manufacturer’s DDNS and Third Part Dynamic DNS: Please refer to the content of the

part 6.2.

3） UPNP:

UPNP stands for universal plug and play, if you started UPNP, once the IP

camera was connected into the LAN, it will communicate with the router of the LAN. It will

request the router to open a port to forward its own port. User doesn’t need to log in the

router to set the port forwarding.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Sin comentarios

Wansview B Series Manual de usuario Pagina 16